document number: 93346 for technical ques tions, contact: diodes-tech@vishay.com www.vishay.com revision: 04-mar-09 1 schottky rectifier, 2 x 20 a 43ctq...s, 43ctq...-1 vishay high power products features ? 175 c t j operation ? center tap configuration ? low forward voltage drop ? high purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance ? high frequency operation ? guard ring for enhanced ruggedness and long term reliability ? designed and qualified for aec-q101 level description this center tap schottky rect ifier series has been optimized for low reverse leakage at high temperature. the proprietary barrier technology allows for reliable operation up to 175 c junction temperature. typical applications are in switching power supplies, freewheeling diodes, and reverse battery protection. product summary i f(av) 2 x 20 a v r 80/100 v 43ctq...s base common cathode d 2 pak to-262 43ctq...-1 anode anode common cathode 1 3 2 2 base common cathode anode anode common cathode 1 3 2 2 major ratings and characteristics symbol characteristics values units i f(av) rectangular waveform 40 a v rrm 80/100 v i fsm t p = 5 s sine 850 a v f 20 apk, t j = 125 c (per leg) 0.67 v t j range - 55 to 175 c voltage ratings parameter symbol 43ctq080s 43ctq080-1 43ctq100s 43ctq100-1 units maximum dc reverse voltage v r 80 100 v maximum working peak reverse voltage v rwm absolute maximum ratings parameter symbol test conditions values units maximum average forward current see fig. 5 per leg i f(av) 50 % duty cycle at t c = 135 c, rectangular waveform 20 a per device 40 maximum peak one c ycle non-repetitive surge current per leg see fig. 7 i fsm 5 s sine or 3 s rect. pulse following any rated load condition and with rated v rrm applied 850 10 ms sine or 6 ms rect. pulse 275 non-repetitive aval anche energy per leg e as t j = 25 c, i as = 0.50 a, l = 60 mh 7.50 mj repetitive avalanche current per leg i ar current decaying linearly to zero in 1 s frequency limited by t j maximum v a = 1.5 x v r typical 0.50 a
www.vishay.com for technical questi ons, contact: diodes-tech@vishay.com document number: 93346 2 revision: 04-mar-09 43ctq...s, 43ctq...-1 vishay high power products schottky rectifier, 2 x 20 a note (1) pulse width < 300 s, duty cycle < 2 % electrical specifications parameter symbol test conditions values units maximum forward voltage drop per leg see fig. 1 v fm (1) 20 a t j = 25 c 0.81 v 40 a 0.98 20 a t j = 125 c 0.67 40 a 0.81 maximum reverse leakage current per leg see fig. 2 i rm (1) t j = 25 c v r = rated v r 1 ma t j = 125 c 11 threshold voltage v f(to) t j = t j maximum 0.71 v forward slope resistance r t 0.43 m maximum junction capacitance per leg c t v r = 5 v dc (test signal range 100 khz to 1 mhz) 25 c 1480 pf typical series inductance per leg l s measured lead to lead 5 mm from package body 8.0 nh maximum voltage rate of change dv/dt rated v r 10 000 v/s thermal - mechanical specifications parameter symbol test conditions values units maximum junction and storage temperature range t j , t stg - 55 to 175 c maximum thermal resistance, junction to case per leg r thjc dc operation 2.0 c/w maximum thermal resistance, junction to case per package 1.0 typical thermal resistance, case to heatsink r thcs mounting surface, smooth and greased (only for to-220) 0.50 approximate weight 2g 0.07 oz. mounting torque minimum 6 (5) kgf ? cm (lbf ? in) maximum 12 (10) marking device case style d 2 pak 43ctq080s 43ctq100s case style to-262 43ctq080-1 43ctq100-1
document number: 93346 for technical ques tions, contact: diodes-tech@vishay.com www.vishay.com revision: 04-mar-09 3 43ctq...s, 43ctq...-1 schottky rectifier, 2 x 20 a vishay high power products fig. 1 - maximum forward voltage drop characteristics (per leg) fig. 2 - typical values of reverse current vs. reverse voltage (per leg) fig. 3 - typical junc tion capacitance vs. reverse voltage (per leg) fig. 4 - maximum thermal impedance z thjc characteristics (per leg) 1 100 10 1000 i f - instantaneous forward current (a) v fm - forward voltage drop (v) 0.2 0.4 0. 8 0.6 1.0 1.2 1.4 1.6 1. 8 t j = 175 c t j = 125 c t j = 25 c 0.001 1 10 100 0.1 0.01 1000 i r - reverse current (ma) v r - reverse voltage (v) 20 40 80 100 60 0 t j = 175 c t j = 150 c t j = 125 c t j = 100 c t j = 75 c t j = 50 c t j = 25 c 100 1000 10 000 c t - junction capacitance (pf) v r - reverse voltage (v) 20 40 60 100 8 0 0 t j = 25 c 0.01 0.1 1 10 0.00001 0.0001 0.001 0.01 0.1 1 t 1 - rectangular pulse duration (s) z thjc - thermal impedance (c/w) 10 100 d = 0.75 d = 0.50 d = 0.33 d = 0.25 d = 0.20 single p u lse (thermal resistance) p dm t 1 t 2 n otes: 1. d u ty factor d = t 1 /t 2 2. peak t j = p dm x z thjc + t c
www.vishay.com for technical questi ons, contact: diodes-tech@vishay.com document number: 93346 4 revision: 04-mar-09 43ctq...s, 43ctq...-1 vishay high power products schottky rectifier, 2 x 20 a fig. 5 - maximum allowable case temperature vs. average forward current (per leg) fig. 6 - forward powe r loss characteristics (per leg) fig. 7 - maximum non-repetitive surge current (per leg) fig. 8unclamped inductive test circuit note (1) formula used: t c = t j - (pd + pd rev ) x r thjc ; pd = forward power loss = i f(av) x v fm at (i f(av) /d) (see fig. 6); pd rev = inverse power loss = v r1 x i r (1 - d); i r at v r1 = 10 v 100 110 120 130 140 150 160 1 8 0 170 allowable c ase temperature ( c ) i f ( av ) - average forward current (a) 10 51520 25 30 0 dc see note (1) s qu are w a v e (d = 0.50) 8 0 % rated v r applied 0 5 10 15 20 average power loss (w) i f(av) - average forward current (a) 10 51520 30 25 0 dc rms limit d = 0.20 d = 0.25 d = 0.33 d = 0.50 d = 0.75 100 1000 i fsm - non-repetitive surge current (a) t p - square wave pulse duration (s) 100 1000 10 000 10 at any rated load condition and w ith rated v rrm applied follo w ing s u rge c u rrent monitor high-speed s w itch d.u.t. r g = 25 + free w heel diode v d = 25 v l irfp460 40hfl40s02
document number: 93346 for technical ques tions, contact: diodes-tech@vishay.com www.vishay.com revision: 04-mar-09 5 43ctq...s, 43ctq...-1 schottky rectifier, 2 x 20 a vishay high power products ordering information table 1 - current rating (40 a) 2 - circuit configuration: c = common cathode 3 - t = to-220 4 - schottky ?q? series 5 - voltage ratings 6 - s = d 2 pak -1 = to-262 7 - none = tube (50 pieces) trl = tape and reel (left oriented - for d 2 pak only) trr = tape and reel (right oriented - for d 2 pak only) 8 - none = standard production pbf = lead (pb)-free 080 = 80 v 100 = 100 v device code 5 13 24 678 43 c t q 100 s trl - links to related documents dimensions www.vishay.com/doc?95014 part marking information www.vishay.com/doc?95008 packaging information www.vishay.com/doc?95032 spice model www.vishay.com/doc?95065
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
